A load-board-native TMS→
ULTRASHIP LOGOIn collaboration
with
Cash Flow Guide

Freight Broker Factoring: How It Works and What the Cash Gap Costs

Shippers pay in 30 to 60 days. You pay carriers in 15 to 30, so the difference comes out of your own account on every load.

Published November 17, 20268 min read
Pen resting on the amount line of a paper check

The cash gap is the number of days between paying the carrier and getting paid by the shipper. In one example, $30 million of revenue on a 10 day gap ties up about $821,918 of your own cash and costs $57,534 a year to carry at 7 percent. Factoring and quick pay both shorten the wait, and both take a bite out of margin per load.

What is the cash gap, and why does every brokerage have one?

You pay the carrier before the shipper pays you. That wait is the cash gap. Every brokerage has one, and yours already has a number.

Most owners feel it before they measure it. The money leaves on a Tuesday for three loads and the shipper checks land three weeks later. Do that for a month and the balance never quite recovers.

The dates come from two different contracts. Carriers are typically paid 15 to 30 days after delivery. Shippers pay net 30 to 60. When the carrier date lands before the shipper date, you fund the difference out of your own account.

The survey data backs up the shipper side. 48% of brokers say shippers take three to four weeks to pay an invoice, and another 30% say a month or more. The slow half of your book is the normal case.

The sum

Gap days are the day the shipper pays you minus the day you pay the carrier, both counted from delivery, floored at zero. Capital tied up is annual revenue divided by 365, times the gap days.

Length is the whole problem. A 10 day gap and a 30 day gap are the same business, with the same margin and a different bank balance.

What does the gap cost you in dollars?

Here is the arithmetic, on one example you can follow line by line.

Example: a brokerage runs $30,000,000 a year and takes 10 days between paying the carrier and getting paid. Annual revenue divided by 365 is $82,192 of revenue a day. Times 10 days, and $821,918 of the brokerage's own cash is out on freight at any moment.

That cash carries a cost whether or not anyone invoices you for it. At a 7% cost of money, example only, $821,918 times 7% is $57,534 a year. Call it $158 a day.

Per load is where it gets personal. In the same example, 1,000 loads a month at $2,500 a load is 12,000 loads a year, so about $68 of your own cash rides on every load. Your gross margin on that load might be $200.

The 7% is an assumption you set. A line of credit, your own cash and a factor all price money differently. What matters is the shape of the number, and the shape is a payment you never agreed to.

One more figure makes the gap legible to a partner. Every day you take out of it is worth annual revenue divided by 365, times your cost of money. In the example that is $5,753 a day. Ask a shipper for five days and you have $28,767 a year.

Want this on your own dates? Put your shipper and carrier payment days into the free cash gap calculator and it returns the same four numbers for your shop.

How does factoring work, and what does it really cost?

Factoring sells the invoice. You deliver, you bill the shipper, and a finance company advances most of the invoice now and collects from the shipper later.

Brokers and carriers both factor, and the two deals are different. A carrier factors the invoice it bills you. A broker factors the invoice it bills the shipper. You are the second one.

Three numbers set the price.

  • Advance rate. The share of the invoice paid to you up front, commonly 90 to 96 percent on freight receivables.
  • Discount fee. What the factor charges, commonly 1.5 to 4.0 percent per 30 days. Annualized, that band is roughly 18 to 48 percent.
  • Reserve. The rest of the invoice, held until the shipper pays. A 90 percent advance leaves a 10 percent reserve.

Example: a $50,000 shipper invoice at a 90 percent advance with a 3 percent fee for 30 days. You get $45,000 the day the paperwork clears. The factor keeps $1,500 and releases $3,500 of reserve when the shipper pays. You collected $48,500 on $50,000 of freight.

The fee is quoted per 30 days. An invoice that takes 60 days to collect runs for two periods, and the second one is where the cost lands, because the advance is already spent.

Read the whole fee schedule before you sign. Wire fees, monthly minimums, onboarding charges and termination fees all land on the same invoice, and they are why two factors quoting 2 percent can cost very different money.

Free tool. Enter your loads a month, your revenue per load and your two payment dates, and the free cash gap calculator shows the cash tied up, the yearly cost of carrying it and what one day is worth.Open the calculator →

Recourse or non-recourse: who takes the loss?

One line in the contract decides who pays when a shipper does not.

  • Recourse. If the shipper never pays, you buy the invoice back, or the factor takes it out of your next advances. It is the most common deal and usually the cheapest.
  • Non-recourse. The factor absorbs the loss, but usually only when the shipper cannot pay for credit reasons, such as insolvency. A dispute over the load, missing paperwork or fraud normally still comes back to you. It costs more.

Read the definition of a non-recourse event in the contract itself, not in the sales deck. It usually covers less than owners assume.

The notice of assignment

When you factor, your shipper gets a notice of assignment telling it to pay the factor instead of you. A shipper that keeps paying you after that notice can end up owing twice, so it will follow the notice. To move the account back, or to another factor, you need a letter of release.

What does quick pay cost you when a carrier asks for it?

Quick pay is your own program. The carrier asks to be paid in 24 to 48 hours instead of waiting out your terms, and you charge a fee reported at 1 to 3 percent of the load.

Example: a $2,000 carrier pay at 2 percent is $40. On 500 quick pay loads a month that is $20,000 a month, or $240,000 a year, and you funded every one of those loads from your own account.

Quick pay cuts both ways on the gap. It is a real recruiting tool when capacity is tight and a carrier will take the load for the faster check. It also pulls your payment date forward, so the gap to the shipper widens by however many days you just removed.

When capacity is loose, quick pay buys you less. The carrier was going to take the load anyway. Run the fee against what the load actually pays before you offer it on every load as standard.

There is a version that pays for itself. Offer quick pay on the lanes where the shipper pays early, and let the rest of the book run on terms.

When does factoring eat the spread?

Factoring is a cost per load, so compare it to margin per load.

A representative mid-market brokerage runs a 9.91 percent gross margin on $1,912 of revenue per load. That is about $189 a load, and it is the pool everything comes out of. The full breakdown is in freight broker profit margin benchmarks.

Example: if your all in factoring cost comes to 5 percent of the invoice, and your gross margin is 9.9 percent, then 5 divided by 9.9 is 0.51. Factoring takes about half the spread on every factored load. On a $1,900 load, roughly $95 of the $189 goes to cash flow.

Those are the sums. Your own cost depends on the shipper's credit, your volume and your contract.

The break point is easy to state. When the fee is larger than the interest you would pay on a line of credit for the same days, you are paying for convenience. When the line is not there, the fee is the price of staying open. Neither is wrong. You want to know which one you are doing.

Watch the invoices that sit. A factored invoice the shipper disputes, short pays or never approves keeps running for another 30 day period while your reserve is still held.

What are the three ways to shrink the gap?

Three levers move the number, and each one moves it in days. Days are the currency here.

Pay the carrier a little later

If carriers are typically paid 15 to 30 days after delivery, there is room at the fast end. Example: moving from day 20 to day 25 frees $410,959 of cash in the $30 million model and saves $28,767 a year at 7 percent.

Get the shipper to pay sooner

The same five days from the other side. Ask for net 25 instead of net 30 at renewal, or on the next lane you take. Same cash, same saving, and your carrier terms stay where they are.

Invoicing speed sits inside this lever. A delivered load sitting unbilled is a gap you made yourself. Seeing delivered loads that are not invoiced, and AR aging by shipper and by load, is what freight broker accounting puts in front of you.

Collect part of the invoice on delivery

Half on delivery, half on the net date. The half paid on delivery stops waiting 30 days for the money, and in the example it closes the gap outright: $821,918 freed and $57,534 a year.

Pick one lever first. Change three at once and you cannot tell which one worked.

How do you work out your own number?

Start with four inputs: loads a month, revenue per load, the day you pay the carrier, and the day the shipper pays you. Add your cost of money if you want the yearly figure.

The cash gap calculator takes those four and returns the gap in days, the cash tied up, the cost of carrying it for a year, and what one day is worth. Turn on the quick pay switch and it adds the fee to the annual cost. Nothing leaves your browser.

It also prints a one pager with the current gap, the yearly cost and the three levers, written from your numbers. That is the version you hand a partner or a bank.

The result is a model. It uses a 365 day year and a simple cost of money, and it ignores seasonality, disputes and partial payments. Size the problem with it, then check the answer against your own receivables and payables.

What should your payment terms actually say?

Your contract decides who pays when. Get five things written into it.

  • The start date. Delivery, POD received, or invoice date. A load delivered Friday with a POD that lands Tuesday has a two day gap nobody wrote down.
  • The net date. Stated in days from that start.
  • The quick pay fee. A percentage and a deadline. A 1 to 3 percent range will be read at the bottom of the range.
  • Accessorials and detention. They bill separately and they bill later, so say when they are due.
  • Where the money goes if you factor. The receivable is assigned, so the shipper pays the factor. Change the remittance block on your invoice and tell the shipper before the first factored invoice goes out.

Terms are a negotiation, so the number to bring is what a day is worth. In the $30 million example, one day is $5,753 of cash and about $403 a year of carrying cost. Ask for five days and you are asking for $28,767.

Your accountant and your counsel own the agreement. The arithmetic is yours.

How do you choose a factoring company as a broker?

Ask every factor the same questions and get the answers in writing.

  1. Recourse or non-recourse, and exactly what counts as a non-recourse event.
  2. Advance rate and reserve, and when the reserve is released.
  3. Flat or tiered fee, and what the fee becomes when an invoice reaches 60 and 90 days.
  4. Every fee outside the rate: wires, minimums, onboarding and termination.
  5. Term and exit: contract length, notice period and how the letter of release works.
  6. The lien: whether it covers only your receivables or all of your business assets. Ask your counsel to read it.
  7. Paperwork: whether invoices and PODs go to the factor from your TMS, or someone retypes them.

The last point decides how much work factoring adds to your back office. UltraShip integrates with Denim in both directions. You see the shipper’s Denim eligibility on the load, send the delivered load, invoice and paperwork to Denim in one click, and funding status and documents sync back to the load. Denim can pay the carrier straight from the invoice money, and the advance, rebate and fee post to QuickBooks. See how the Denim factoring integration works.

Common questions

What is the cash gap in freight brokerage?

It is the number of days between the day you pay the carrier and the day the shipper pays you, both counted from delivery. Carriers are typically paid 15 to 30 days after delivery and shippers pay net 30 to 60. You fund the freight in between from your own account, so a longer gap ties up more cash.

How much does broker factoring cost?

Advance rates on freight receivables commonly run 90 to 96 percent. The discount fee is commonly 1.5 to 4.0 percent per 30 days, roughly 18 to 48 percent annualized, and a reserve is held until the shipper pays. Ask for the full fee schedule, then compare it with what a shorter gap is worth in your own numbers.

What does quick pay cost a carrier?

Quick pay moves the carrier's money in 24 to 48 hours for a fee reported at 1 to 3 percent of the load. On a $2,000 carrier pay at 2 percent, that is $40, and you fund it. The carrier gets cash sooner while the shipper keeps its own net terms, so your gap widens by the days you removed.

How do I work out the cash tied up in my payment gap?

Take annual revenue, divide by 365, then multiply by the gap in days. Example: $30 million with a 10 day gap ties up about $821,918, which is an illustration only. Multiply that capital by your cost of money for the yearly cost. The free calculator runs the whole sum from your own dates.

Is factoring worth it for a small brokerage?

It depends on your spread and your gap. Example: at a 5 percent all in cost against a 9.9 percent gross margin, cash flow takes roughly half the margin per load. If your gap is short and your shippers pay on time, the fee buys you less. Run your own numbers before you sign a contract.

Can a freight broker use a factoring company?

Yes. A broker factors the invoices it sends its shippers, which is a different deal from a carrier factoring the invoices it sends the broker. The factor advances most of the shipper invoice and collects from the shipper, so your shippers will receive a notice of assignment.

What is the difference between recourse and non-recourse factoring?

With recourse factoring, you carry the loss if the shipper never pays. With non-recourse factoring, the factor carries it, but usually only for credit events such as insolvency, not for disputes, paperwork or fraud. Non-recourse costs more, so read exactly what the contract covers.

What is a notice of assignment in factoring?

It is the letter that tells your shipper to pay the factor instead of you. Once the shipper has it, paying you directly can leave the shipper owing twice, so payments follow the notice until a letter of release moves the account back.

Enter your loads a month, your revenue per load and your two payment dates, and the free cash gap calculator shows the cash tied up, the yearly cost of carrying it and what one day is worth. Open the calculator →

See invoicing, AR aging by shipper and margin per load in one system, on your own freight. Book a demo →

Sources & notes
  1. 48% of brokers say shippers take three to four weeks to pay an invoice, and another 30% a month or more. Truckstop and Bloomberg Intelligence, H1 2026 freight broker survey
  2. A representative mid-market brokerage runs a 9.91% gross margin, about $189 on $1,912 of revenue per load. FreightWaves, how freight brokers are staying afloat
  3. A 10 day gap on $30 million of revenue ties up about $820,000 and costs about $58,000 a year at a 7% cost of capital. FreightWaves, the working capital drag
  4. Advance rates of 90% to 96% and discount fees of 1.5% to 4.0% per 30 days, an effective 18% to 48% annualized. PeerSense, trucking and freight broker factoring
  5. The difference between broker factoring and carrier factoring, the reserve as the remainder of the advance, a $50,000 invoice walked through, and the change of remittance when a receivable is assigned. Indemni, freight factoring guide for brokers
  6. Carrier terms of 15 to 30 days, shipper terms of net 30 to 60, quick pay in 24 to 48 hours for a 1% to 3% fee, the calculation method, and the example outputs of $821,918, $57,534, $5,753 a day and $410,959 for five days. UltraShip, free cash gap calculator
  7. UltraShip accounting: invoicing from the load, delivered loads not yet invoiced in one view, AR aging by shipper and by load, carrier settlement, and margin live on the load. UltraShip, freight broker accounting
  8. Recourse is the most common and usually the cheapest; non-recourse usually covers credit risk only, not performance, documentation or fraud FreightWaves: recourse vs non-recourse factoring
  9. A payor that ignores a proper notice of assignment can face double-payment liability; a release letter moves payments back Triumph: what every freight broker should know about factoring
  10. Questions to ask a factor, including whether it files a blanket lien or an A/R-only lien Indemni: freight factoring guide for brokers