Detention is the hourly charge for a truck held at a dock past its free time, and the broker usually pays the carrier before the shipper pays the broker. Collecting it takes three things: a rate on the rate confirmation, timestamps that match, and an invoice that goes out the same day. Whether a shipper has to pay depends on the contract for that load.
What is detention, and how is it different from layover?
Detention is the hourly charge a truck earns when it sits at a shipper or receiver past the free time in its agreement. The clock starts when the driver checks in, not when the appointment was booked, and it runs until the driver is released.
Layover is a separate line on the invoice. Detention pays by the hour for a wait inside the working day. Layover is flat daily pay when a truck is held overnight or loses a full day, for example a Friday delivery that cannot unload until Monday. One trip can trigger both, and billing the wrong one is a common reason the whole accessorial gets denied.
Detention is an accessorial charge. It is not automatic, and whether a shipper has to pay it depends on the contract for that load. If the free time and the hourly rate are not written into the rate confirmation, you are asking the shipper for a favor instead of billing a term you both agreed to.
Detention, layover and TONU in one line each
- Detention: hourly pay for waiting past free time at a dock.
- Layover: flat daily pay for an overnight or full day hold.
- TONU: pay when a booked truck is turned away and the load never runs.
All three belong in the accessorial section of your rate confirmation, spelled out before the carrier accepts the load.
How much free time does a shipper usually give?
Two hours is the common starting point, and nothing more than that. According to the 2026 detention pay rate guide from O Trucking, free time by facility type looks like this:
- Standard: 2 hours, the most common term across regions.
- Ports: 1 to 2 hours, often shorter because of volume.
- Grocery and retail distribution centers: 2 to 3 hours, from longer processing times.
- Construction sites: 2 to 4 hours, negotiated case by case.
- Some specialized freight: 3 hours, for example step deck and RGN.
The same guide notes that the clock and the rate should both be in writing on the rate confirmation before the truck arrives.
When does the clock start?
There are two common rules. Free time starts at arrival, or it starts at the later of the appointment and the arrival. They give different numbers on the same load: a driver who checks in 15 minutes early under the second rule starts the clock at the appointment time, not at check in.
Say which rule you use on the rate con. Then say how time is rounded. Rounding up to the next started hour is common, and some shops round to the next 15 minutes.
If the rate con is silent, ask before the load runs.
What does waiting cost a carrier, and what should you charge?
Waiting is a real cost, and most of it is never paid. In ATRI’s 2024 detention study, drivers were detained at 39.3% of their stops in 2023. Almost every fleet, 94.5%, bills for detention, yet fewer than half of those invoices were paid. ATRI put the cost at $3.6 billion in direct expenses plus $11.5 billion in lost productivity, about $15 billion in one year.
Dry van $50 to $75 an hour, $65 typical. Reefer $60 to $90, $75 typical. Flatbed $65 to $100, $80 typical. Hazmat $75 to $125, $100 typical. These are negotiating ranges from one 2026 rate guide, not a rate for any particular lane.
A carrier that collects on fewer than half of its detention invoices builds the rest into its rates. That shortfall turns up later as a higher line haul on a lane you bid next month, so detention you never bill the shipper still costs you, just on a different line.
An example on one load
Example: 2 hours free, 5 hours on site, so 3 billable hours. At $65 an hour the shipper owes $195. If the carrier's rate confirmation says $70 an hour, the carrier bills you $210. You are $15 under water on that claim before any short pay.
Set the rate you bill at or above the rate you accept from carriers. A rate you charge below a rate you pay means every claim costs you money.
Who pays detention, the broker or the shipper?
The receiver causes the wait. The contract decides who funds it, and you sit in the middle with two agreements that do not always match. You pay the carrier under one and bill the shipper under the other, and the gap between them comes out of your margin per load.
Most brokerages settle the carrier first. The carrier's rate confirmation usually carries a detention rate, so the invoice arrives whether or not the shipper has agreed to anything. That is your exposure: you can owe the carrier while the shipper is still deciding. The detention claim kit makes the same point in its own notes, and asks how often detention goes unpaid on your loads, because that number is the size of the problem.
Whether a shipper must pay depends on the contract. What you control is whether the term exists before the truck arrives.
Four things to put on the shipper's rate confirmation
- The free time, in hours, counted from a stated event.
- The hourly detention rate, as a number.
- When the clock starts: arrival, or the later of appointment and arrival.
- How time is rounded after free time ends.
With those four lines in place, a detention claim is a calculation. The claim kit includes a short what to check list before you send anything, and it is worth running once per shipper account.
Is there a law that makes shippers pay detention?
No. There is no federal rule that sets free time or a detention rate. Detention is a contract term, so the rate confirmation and the shipper agreement decide who pays and how much.
Regulators are still collecting data. FMCSA asked the industry for detention data in 2019, and its earlier 2014 study found detention on about 1 in 10 stops, averaging 1.4 hours beyond the usual two hours. A newer FMCSA study is gathering real-world data from carriers and drivers. Broker groups such as TIA have argued that detention pay is not FMCSA’s to regulate.
So the protection is the paperwork. Write the free time, the rate and the clock rule into every rate confirmation, on the carrier side and the shipper side.
What proof does a detention claim need?
Timestamps first. A claim with clean times gets paid. A claim with a story gets a question back, then silence.
The packet that collects
- Check in time. The gate, guard shack or receiving log, with a time on it.
- Check out time. The release, the signed BOL, or the out gate record.
- The BOL with in and out times. The receiver's stamp or signature is the strongest single document you will have.
- The appointment confirmation. The email or portal message that set the time.
- The rate confirmation page that states free time and the detention rate.
- Location proof. ELD or phone screenshots showing the truck at the facility, with timestamps.
- The message trail. Your notes to the carrier and the shipper as the free time ran out.
Two rules on top of the list. Keep one clock: the same timezone on every document, or the shipper will find the hour you gained. And get the carrier's version in writing the same day, because a driver's memory of a Tuesday dock fades faster than a shipper's gate log.
If the gate log and the driver disagree by 20 minutes, the gate log usually wins the argument. Send your version first, with the photo, so the shipper is responding to your times instead of setting them.
How do you send the claim, the follow up and the final notice?
Send it the same day the load delivers. The 2026 guide from O Trucking puts the window at 24 to 48 hours and warns that a week old detention claim rarely collects.
The invoice
Every detention invoice carries the same lines: load or PO number, shipper and facility, appointment time, arrival, departure, time on site, free time, billable hours, hourly rate and amount due. One page, one rate, one rounding rule.
The first email
Plain and factual. State the load, the times, the free hours, the rate and the amount. Say the hours are time on site less the free time on the rate confirmation. Offer the backup before they ask for it, and invite them to name the line they read differently. That last sentence is what keeps a claim out of a fight.
The follow up
Send it a few days later to a named person rather than a billing inbox. Ask who owns detention invoices on that account, who is paying this one, and by when. If they dispute the hours, ask which timestamp they are working from and read yours back with the date. If they dispute the rate, ask for the rate and free time they are using and compare it with the rate confirmation. Write down the name, the date and what they promised.
The final notice
Restate the same load, the same times and the same amount, attach the evidence on one page, and give a date. Keep the tone flat. A final notice that lists documents and a date is harder to leave open than one that argues.
How do you build the invoice and emails without starting from scratch?
The free detention claim kit takes one load and produces the paperwork. You move the times on a dock clock or type them in, and it gives you billable hours, a printable detention invoice, the first email, a follow up and a final notice, plus a phone script and an evidence sheet that prints on one page. It also works out what unpaid and short paid detention costs your brokerage per load and per year from six numbers off your own books.
Two things make it usable on a live claim. The invoice rounds up to the started hour by default, and you can switch that off to match exact hours in your own terms. And nothing you type leaves the browser, so a shipper's name and a load number stay on your machine.
Run the cost side first, before you run a claim. Put in your loads per month that hit a dock late, the billable hours on each, the rate you charge the shipper, the rate you pay the carrier and the percentage the shipper refuses or short pays. If the rate you pay is higher than the rate you charge, the tool will say so, and that is the line to fix before you chase anyone.
Carriers can send the same claim from their side with the detention invoice builder, which prints an invoice to the broker and ticks the evidence attached to it.
How do you see detention history before you book the load?
Detention history at a shipper is one reason a good carrier declines a tender. A driver who sat four hours at the same dock last month remembers it, and the next load from that facility gets priced high or turned down.
Four numbers per facility
- Average minutes past free time, across the loads you have run there.
- Share of detention claims paid in full.
- Days from invoice to cash.
- How often the shipper disputes the clock.
None of those need a new system. They need the times to land on the load record instead of in a dispatcher's inbox, and the accessorial to be a charge on the load rather than a note in a spreadsheet. Load management keeps charges, accessorials and documents on one record, so a detention claim is a check of the load file rather than a hunt through email. The accounting handoff then carries that charge to the shipper invoice without a second entry.
Use the history twice. Once in the quote: a facility with a 70 minute average overrun gets a higher accessorial rate or a longer free time, and the rate you build reflects the wait you expect. Once in the conversation: a shipper who sees their own dock times over four months has a reason to fix the appointment window that is costing you both.
Then hold the line on the invoice. Example: 3 billable hours at $65 is $195 a load. Ten loads a month at that facility is $1,950 in claims.
Three ways to shorten the wait
- Confirm the appointment in writing. Send the appointment time to the carrier with the rate confirmation, and keep the shipper’s confirmation on the load.
- Tell the receiver early. When a truck is running late or early, a call before arrival gets a new slot. A truck that shows up unannounced waits.
- Book problem docks first. Facilities with long average waits get morning appointments, a higher accessorial or drop trailer where the shipper offers it.
Common questions
What is detention in trucking?
Detention is the hourly charge for a truck held at a shipper or receiver past the free time in its agreement. The clock starts when the driver checks in and runs until release. It is an accessorial charge rather than an automatic entitlement, so the rate and the free time need to be in writing on the rate confirmation.
How much free time does a shipper usually give?
Two hours is the common standard, though it is not a rule. Ports often allow 1 to 2 hours, grocery and retail distribution centers 2 to 3, and construction sites 2 to 4. Some specialized freight allows 3 hours. The binding number is whatever the rate confirmation for that load says, so check it before the truck arrives.
How do I bill a shipper for detention?
Send a one page invoice with the load number, facility, appointment, arrival and departure times, the free time, the billable hours, the hourly rate and the amount due. Attach the check in and check out records and the BOL. Send it the same day the load delivers, then follow up by phone and in writing until someone owns it.
What proof do I need for a detention claim?
Timestamps carry the claim: the check in and check out times, the BOL with in and out stamps, the appointment confirmation and the rate confirmation page showing free time and the rate. Add ELD or tracking screenshots and your messages as the free time ran out. Keep every document on the same timezone so the hours reconcile.
What is the difference between detention and layover?
Detention pays by the hour when a truck waits past free time inside the working day. Layover is flat daily pay when the truck is held overnight or loses a full day, such as a Friday delivery that cannot unload until Monday. One trip can trigger both, so keep them as separate lines and bill the one that actually happened.
How much is detention pay per hour?
There is no set rate. One 2026 rate guide puts dry van at $50 to $75 an hour, reefer at $60 to $90, flatbed at $65 to $100 and hazmat at $75 to $125. The rate that counts is the one on the rate confirmation for that load, so agree it before the truck arrives.
Does a broker have to pay the carrier detention if the shipper refuses?
Usually, if your rate confirmation with the carrier promised detention. Your agreement with the carrier is separate from your agreement with the shipper, so a shipper refusal does not cancel what you owe the carrier. That is why the same free time and rate belong on both sides. Check your own contracts with counsel.
Is trucking detention the same as container detention and demurrage?
No. In trucking, detention is pay for a truck and driver kept waiting at a dock. In ocean shipping, detention and demurrage are fees for keeping a container or equipment past its free days. Same word, a different charge and a different contract.
The free detention claim kit turns one load's arrival and departure times into billable hours, a printable invoice, the first email, a follow up and a final notice, and shows what unpaid detention costs you a year. Open the claim kit →
See detention, accessorials and the shipper invoice on one load record, on your own freight. Book a demo →
- Drivers detained at 39.3% of stops in 2023; 94.5% of fleets bill detention but are paid on fewer than half of those invoices; $3.6 billion in direct expenses and $11.5 billion in lost productivity ATRI, Costs and Consequences of Truck Driver Detention, September 2024
- Typical detention rates by freight type: dry van $50 to $75 an hour with $65 typical, reefer $60 to $90 with $75 typical, flatbed $65 to $100 with $80 typical, hazmat $75 to $125 with $100 typical O Trucking: Detention Pay Rates 2026, rate table
- Free time by facility type: 2 hours standard, 1 to 2 hours at ports, 2 to 3 at grocery and retail distribution centers, 2 to 4 at construction sites, 3 hours for some specialized freight such as step deck and RGN O Trucking: Detention Pay Rates 2026, free time standards
- Detention typically begins after about 2 hours of free time, is an accessorial charge that must be agreed in writing, can be declined by a broker when it was never agreed, and should be invoiced within 24 to 48 hours O Trucking: Detention Pay Rates 2026, invoicing and mistakes
- The detention claim kit builds billable hours from arrival and departure times, a printable detention invoice, a first email, a follow up, a final notice, a phone script and an evidence sheet, runs in the browser with no sign up, and calculates the cost of unpaid detention per load and per year UltraShip detention claim kit
- The detention invoice builder prints a detention invoice for the broker, rounds billable time to the next 15 minutes, and produces an evidence checklist for the carrier UltraShip detention invoice builder
- Load management keeps charges and accessorials, carrier and load documents, and the handoff to accounting on one load record UltraShip load management
- FMCSA’s 2014 study found detention on about 10% of stops, averaging 1.4 hours beyond two hours; FMCSA’s request for information on detention data FreightWaves: FMCSA seeks comments on truck driver detention times
- FMCSA’s newer study collecting real-world detention data from carriers and drivers FreightWaves: FMCSA outlines new driver detention study
- TIA’s view that detention time should not be regulated by FMCSA FreightWaves: Truckers push FMCSA to make brokers pay for detention time
- Ocean detention and demurrage as container fees past free time Maersk: demurrage and detention explained
