A load-board-native TMS→
ULTRASHIP LOGOIn collaboration
with
Integration · Load board

Post to Truckstopstraight from the load

Post loads to Truckstop straight from UltraShip, on its own or together with every other board in one click. Refresh and repost in place, and never open a Truckstop tab to re-key a load again.

✓One-click posting✓Refresh and repost in place✓No re-keying
★★★★★4.8/5 RATED ON G2 | ★★★★★5.0/5 RATED ON CAPTERRA
The short answer

Does UltraShip integrate with Truckstop?

Yes. UltraShip brokers post loads to Truckstop directly from the load page. Truckstop appears in the Post on Load Boards card with DAT Convoy, Loadboard Network and 123Loadboard, so posting to every board happens from one place. UltraShip also connects RMIS by Truckstop for carrier onboarding.

What you can do

More carriers, same workflow

How it works in UltraShip

How Truckstop works in UltraShip

Screens from UltraShip, shown with demo data.

STEP 01

Open the load and post

Use the Truckstop Post button, or Post on all Load Boards to reach every connected board at once.

Post on Load BoardsPost on all Load Boards
DAT ConvoyPost
TruckstopPost
Loadboard NetworkPost
123LoadboardPost
LaneDallas, TX → Chicago, IL
EquipmentDry Van 53'
StatusUnbooked
STEP 02

Line up carriers in CarrierQ™

CarrierQ™ lists carriers for the lane with the lane's rate and history above them.

UltraShip CarrierQ Carriers From Lane list with 123Loadboard carriers in the Source column
STEP 03

Book and run the load

Rate confirmation, documents, tracking and invoicing stay on the same load record.

UltraShip load Rates tab with the carrier rate confirmation signed by the carrier
The data

What moves between Truckstop and UltraShip

DataDirectionWhere you see it
Load details for postingUltraShip → TruckstopOn the load, in the Post on Load Boards card
Carrier details and compliance data (RMIS)RMIS by Truckstop → UltraShipThe carrier record
Booking, documents, tracking, invoiceStays in UltraShipThe load record
Before and after

What changes for your brokerage

Without the integration

  • ✕Retype every load on the Truckstop site
  • ✕One tab per load board
  • ✕Carrier onboarding in yet another tool
Answers before you ask

Truckstop integration questions

Does UltraShip integrate with Truckstop?
Yes. You post loads to Truckstop directly from the UltraShip load page.
Can I post to Truckstop and DAT Convoy at the same time?
Yes. The Post on Load Boards card lists Truckstop, DAT Convoy, Loadboard Network and 123Loadboard, with a Post on all Load Boards button.
Does UltraShip work with RMIS by Truckstop?
Yes. RMIS by Truckstop connects to UltraShip, so carrier details and compliance data are pulled by MC or DOT number into the carrier record.
Do I need my own Truckstop subscription?
Load board access is set up with each board. Our team confirms what you need during onboarding.
Is UltraShip only a load board tool?
No. UltraShip is a full TMS for non-asset freight brokers and 3PLs: CRM, quoting, carrier vetting, tracking, documents, invoicing and carrier pay.

See Truckstop posting inside UltraShip

A 15-minute demo on your own loads.